IS THIS MACHINE SUITABLE FOR SMALL WORKSHOPS OR ONE-PERSON BUILDERS?

Yes. Many of our instrument maker customers are solo builders or small teams. The system is designed to reduce manual workload, not add complexity. If your bottleneck is time, repeatability, or setup fatigue, this machine is built to support small workshops just as much as growing ones.

WHAT MATERIALS CAN IT MACHINE RELIABLY?

The system is built for instrument-grade work across wood, hardwoods, laminates, composites, carbon fiber, plastics, and light metals such as aluminum and brass. Material capability depends on tooling and configuration, but rigidity and control are designed with precision work in mind.

HOW LONG DOES INSTALLATION AND SETUP TAKE?

Physical installation is straightforward and typically completed within a day. Initial setup, calibration, and first cuts usually happen within the first few days, depending on workflow complexity. We focus on minimizing downtime and getting you productive quickly.

DO I NEED CNC EXPERIENCE TO RUN THIS?

No prior CNC experience is required. Familiarity with CAD/CAM helps, but the system is designed to be approachable. Many instrument makers transition from manual processes with guidance and support, not trial and error.

WHAT SUPPORT AND TRAINING IS INCLUDED?

Every system includes onboarding support to ensure correct setup, configuration, and operation. We provide guidance tailored to your use case, not generic instructions. Ongoing support is available if questions arise as your workflow evolves.

CAN I UPGRADE LATER INSTEAD OF BUYING EVERYTHING NOW?

Yes. The platform is modular by design. Many customers start with a base configuration and add spindles, automation, or tooling upgrades as their needs grow. You are not locked into a fixed setup from day one.

WHAT KIND OF ACCURACY AND REPEATABILITY CAN I EXPECT?

The system is engineered for consistent, repeatable results suitable for instrument components where geometry and fit matter. Closed-loop motion, rigid construction, and precision components ensure predictable output across batches and long runs.

HOW DOES ORDERING AND LEAD TIME WORK?

Once your configuration is defined, we provide a clear production and delivery timeline. Lead times vary based on specification and demand, but expectations are set upfront so you can plan with confidence.

PLUG.
PRODUCE.
ANYWHERE.

Automation for
instrument makers
who refuse to
compromise on quality

EXECUTIVE SERIES 8

STARTING AT €40,495.00 | €500/mo*

The Executive Series 8 is a compact industrial CNC system designed to eliminate manual bottlenecks and deliver consistent, unattended production. Built on the same modular platform as larger factory systems, it brings industrial reliability into workshops, mobile setups, and small production environments.

Industrial-grade rigidity and motion control in a compact format
Stable, repeatable output across long production runs
Automation-ready platform for probing, vacuum, and robotics
Reduced setup time through standardized workflows
Built for workshops that need factory-level consistency

CONFIGURE SYSTEM

How it fits your workshop

Designed to integrate without rethinking your

Space or workflow.

WHAT STAYS IN YOUR HANDS

COMPACT FOOTPRINT FOR SMALL
AND MID-SIZED WORKSHOPS
NO DEDICATED
FACTORY ROOM REQUIRED
STANDARD POWER AND
DUST EXTRACTION
QUIET ENOUGH FOR
SHARED SPACES
SETUP MEASURED IN DAYS,
NOT MONTHS

MATERIALS
COMMONLY MACHINED

Material capability depends on tooling,

spindle configuration, and workholding.

Hardwoods and softwoods

Plywood and engineered boards

Tonewoods and laminated blanks

Aluminum and non-ferrous alloys

Carbon fiber and composite materials

Resins and layered composites

Plastics and synthetic materials

Specialty materials used in INSTRUMENTS

FROM DAY 1
THIS IS WHAT CHANGES

From raw material to repeatable geometry

without REMOVING HUMAN control.

Geometry becomes consistent before craftsmanship begins

Necks, bodies, pockets, and cavities start identical,

every time.

Manual work moves downstream,
not upstream

Luthiers focus on voicing, finishing, and assembly

not rough shaping.

Output increases
without hiring or retraining

The machine absorbs repetition

while your process stays familiar.

Once geometry is controlled, the question becomes

scale, flexibility, and longevity.

BUILT AS A PLATFORM
NOT A SINGLE-PURPOSE MACHINE

A modular architecture that scales

with your production, not against it.

고강성 강철 프레임

폐쇄 루프 서보 모터

2.2kw 더블 세라믹 베어링 스핀들

산업용 등급 표준 부품

FLOATING DUST SHOE

Clean machining. Clear visibility. Consistent results.

EACH MACHINE IS EQUIPPED WITH A
FLOATING DUST SHOE

that follows the surface of the material during machining.

This ensures:

Continuous debris removal while cutting
Clear visibility of the toolpath
Reduced material buildup on the workpiece
Cleaner finishes and improved consistency

The floating design allows the shoe to adapt to surface variations without affecting cutting accuracy.

Dust extraction hardware itself is supplied by the user, allowing each workshop to choose a system that fits their material, volume, and local requirements.

OPTIONAL MIST SUPPORT

The dust shoe also supports the use of mist cooling, a controlled mixture of distilled water and oil.

Mist provides:

Tool lubrication
Improved cooling during cutting
Extended tool life
BETTER SURFACE QUALITY ON DEMANDING MATERIALS

This is particularly useful for plastics, composites, and aluminum applications where heat control is critical.

TOOL CHANGe
EXPLAINED

THE DIFFERENCE BETWEEN MTC AND QTC

MANUAL TOOL CHANGE (MTC)

Manual tool changing is the traditional approach most machinists start with.

The tool is clamped directly into the spindle, and each tool change requires:

Loosening and tightening the collet
Re-probing the tool length
Verifying offsets before continuing

Strengths:

Simple and easy to learn
Low initial cost
Encourages careful toolpath planning

Limitations:

Every tool change requires re-probing
Increased setup time for multi-tool jobs
Greater risk of inconsistency across operations

Quick Tool Change

bridges the gap between

fully manual and fully automated machining.

QUICK TOOL CHANGE (QTC)

Instead of changing tools directly in the spindle, tools are mounted in dedicated tool holders.

Each tool’s length is measured and stored once before machining begins.

During operation:

The machine moves to a predefined tool change position
The operator swaps tool holders quickly and repeatably
No re-probing is required for each tool change

Key advantages:

Dramatically reduced setup time compared to manual tool change
Consistent, repeatable tool offsets
Faster multi-tool workflows without automation complexity
Maintains full hands-on control

OUR EVERY MODEL

STARTS WITH

QUICK TOOL CHANGE

ITS THE FOUNDATION OF OUR PLATFORM.
ENABLING EFFICIENT MULTI-TOOL WORKFLOWS TODAY,
WHILE CREATING A SEAMLESS UPGRADE PATH
TO FULL AUTOMATION TOMORROW.
WHEN PRODUCTION DEMANDS INCREASE,
THE SAME MACHINE CAN BE UPGRADED TO
AUTOMATIC TOOL CHANGE.
WITHOUT REPLACING THE BASE PLATFORM.

OPTIONAL UPGRADE

Just a natural progression from assisted efficiency to full automation.

AUTOMATIC TOOL CHANGE (ATC)

For users who require:

Higher production volumes
Longer unattended runs
Fully automated workflows

Automatic Tool Change can be added as the next step.

no base replacement required.

ATC builds directly on the same platform

QTC removes interruption. ATC removes presence.

ADDITIONAL UPGRADEs

While the core platform is optimized for precision CNC machining,

additional upgrades are available for users with highly specific production needs.

SAFETY ENCLOSURE

A fully enclosed workspace designed to enhance operator safety, reduce noise levels, and contain chips, dust, and debris during machining operations.

Well suited for shared workshops, educational environments, and production spaces with stricter safety or compliance requirements.

6-AXIS ROBOTIC HAND

An advanced add-on for highly specialized workflows requiring automated part handling, repositioning, or complex multi-step operations.

Best suited for users with specific automation needs beyond standard CNC machining and traditional toolpath operations.

These upgrades are optional and intended for niche production cases.

Below, you can see both the 6-axis robotic hand and safety enclosure operating together on an Executive Series 8 system.

INTEGRATED
AUTOMATION CELL

This setup demonstrates the combination of a safety enclosure and a 6-axis robotic hand working alongside the CNC platform.

The enclosure provides a controlled, safe operating environment, while the robotic hand enables automated part handling and multi-step workflows.

This configuration is intended for highly specialized use cases where extended automation or unattended operation is required.

BUILD THE SYSTEM THAT
FITS YOUR WORKFLOW

Start with the right base, upgrade only when it makes sense, and scale at your own pace.

Request a Demo

“Before this system, the bottleneck was always

manual intervention.

Now the machine runs predictably,

which lets the rest of the workshop stay in motion.”

“Accuracy stopped being something we had to

constantly check.

Once the job is set up,

the result is consistent from the first cut to the last.”

“The biggest gain wasn’t just faster cutting,

it was mental load.

I no longer have to

plan my day around standing next to the machine.”

“Tool handling and probing used to

interrupt flow constantly.

With multiple tools prepared in advance,

the process feels structured instead of reactive.”

최고만을 사용하여 제작

5.0 ROBOTICS는 최고급 산업 파트너들과 자랑스럽게 협업하여 우리의 기계에 통합하는 고품질 부품을 공급받고 있습니다. 우리는 고객에게 최고를 제공하기 위해 최선을 다하며, 이러한 파트너십을 통해 제품의 우수한 품질을 유지할 수 있습니다.

TECHNICAL
SPECIFICATIONS

Engineered for precision, repeatability, and long-term stability

model

8

16 Dimensions And Motors

X axis

Y axis

Z axis

Table Work Area*

650mm (25.6 inches) 400W closed loop Servo Motors

1220mm (48 inches) 400W closed loop Servo Motors

200mm (7.87") 400W closed loop Servo Motors

The machine cutter centre to cutter travel is 650mm x 1220mm within this Table

1250mm (49.2 inches) 400W closed loop Servo Motors

1220mm (48 inches) 400W closed loop Servo Motors (Two motors)

200mm (7.87") 400W closed loop Servo Motors

The machine cutter centre to cutter travel is 1250mm x 1220mm within this Table

*Table work area is not the same as the machine travel.
this is the Tslot table size on the machine.

Spindle systems made in Italy

2.2 kW HSK40 QTC Spindle HIGH TORQUE

9 kW ISO30 ATC Spindle (380V)

Quick change spindle system - 2.2kW Spindle with HSK40 ER32. Tool change is carried out with a torqued allen key wrench. The advantage is tool changes without the cost and complexity of full robotic automatic tool change. Max cutter size 20mm shank. Up to 24.000 rpm and 3.5Nm of Torque.

3.8kW 24,000 RPM spindle system with fully automatic air drive pick and place ATC automatic tool change. NOTE this spec requires a tool magazine to manage the tools for the automate changing. ER32 ISO30 tooling – Max cutter size 20mm shank.

MOTION SYSTEM

Full Ballscrew system T7 GRADE

One 20mm Ballscrew on X Axis

One 20mm Ballscrew on Y Axis

One 16mm Ballscrew on Z Axis

One 20mm Ballscrew on X Axis

Two 20mm Ballscrew on Y Axis

One 16mm Ballscrew on Z Axis

Precision Linear Rails

20mm size profiled linear HIWIN rails with 4 carriages per axis

TECHNICAL DATA

Machine base

All steel frame - 10mm steel laser cut - 80 x 40 steel box section with 6mm to 8mm wall thickness.
Precision machined on aerospace machining center before rail and ballscrew end condition assembly.

Floor space requirement

1050mm x 1850mm

1850mm x 1850mm

Floor space requirement with Safety Enclosure

1350 x 2250mm

2250 x 2250mm with safety cover

Weight

600kg*

800kg*

*depends on extra and configuration

Power

230v 1phase - main machine will run off a 13A single phase supply.
Vacuum pump supply will be separate if applied to the machine.

Feed rate

Rapid Feed Rate

10,000mm/min - 15,000mm/min (depends on model )

We perform a geometric accuracy test to each machine we produce.

All of our measurements are made with Mitutoyo calibrated instruments.

Technical data

Gantry bridge

160x80mm heavy duty Alloy Bridge. For light and strong construction. High accelerations and speeds realized and high strength for maximum rigidity.

Gantry Supports

FEA designed precision machined construction - the Gantry supports are machined form solid 6082T6 Alloy on a machining centre and have been optimized for max strength transfer into the bridge from the frame.